Dough Calculator

Hydration

Dough Hydration Calculator: Water for Any Flour Weight

Enter the flour you are going to weigh out and the hydration you are aiming for. You get the water in grams, the salt, the total dough weight, and a table of what the same flour looks like from 55% to 80%.


What hydration actually measures

Hydration is the weight of the water divided by the weight of the flour, multiplied by 100. A dough at 65% holds 65 g of water for every 100 g of flour. It is not a percentage of the finished dough, and that is the single most common reason a batch comes out wetter or drier than expected: 65% of a kilo of flour is 650 g of water, while 65% of a kilo of dough would be 650 g of dough all told, flour included.

The flour is always the 100% mark in a baker's recipe. Every other ingredient is measured against it, which is why a formula written this way can be scaled up without breaking.

How to use this calculator

  1. Put in the flour weight you are actually going to weigh out, not the total dough weight you want.
  2. Set the hydration you are aiming for. 62% is a sensible first batch for pizza; bread usually sits between 70% and 80%.
  3. Leave salt at 2.5% unless you have a reason. Salt above roughly 3% starts to slow the yeast noticeably.

The result gives you the water in grams, the salt, and the total dough weight. Underneath it there is a table of the same flour at 55% through 80%, so you can see what a ten-point swing in hydration actually costs you in water.

Water for 1,000 g of flour at each hydration

Hydration Water Total dough (with 2.5% salt)
55% 550 g 1,575 g
60% 600 g 1,625 g
62% 620 g 1,645 g
65% 650 g 1,675 g
70% 700 g 1,725 g
75% 750 g 1,775 g
80% 800 g 1,825 g

Every 5 points of hydration is 50 g of water per kilo of flour. That is about three tablespoons, which is enough to turn a manageable dough into one that sticks to both hands.

Going the other way: from water to flour

If you have a jug of water already measured and want to know how much flour it needs, divide the water by the hydration. At 70% hydration, 700 g of water needs 700 ÷ 0.7 = 1,000 g of flour. At 60%, the same 700 g of water would need 1,167 g of flour.

Why the same percentage feels different in two kitchens

Hydration is a number; how wet a dough feels is not. Four things move the feel without changing the percentage:

Because of this, treat the number as a starting point and hold back 5% of the water until you have mixed. It is far easier to add water than to take it out.

Which hydration for which bake

What you are making Usual hydration
Neapolitan pizza 58–65%
Home-oven thin crust 60–65%
New York style pizza 62–65%
Focaccia and pan pizza 75–85%
Sandwich bread 65–72%
Sourdough 70–80%
Ciabatta 75–85%

Above 85% the mix stops being a dough you can knead by hand and becomes something closer to a batter, which only makes sense in a tin or a tray.

Questions

Is hydration based on the flour or on the total dough?

On the flour, always. If a recipe says 65% and gives you 1,000 g of flour, the water is 650 g and the finished dough weighs about 1,675 g once salt is in. Anyone quoting hydration against total dough is using a different convention, and the two numbers are not interchangeable.

Does more water make better dough?

Only up to the point your flour can carry it. Past that the dough spreads instead of holding its shape, the crust comes out pale and floppy, and the extra water buys nothing. A 60% dough handled well beats an 80% dough that was never properly developed.

What about eggs, milk or oil?

They count as liquid and as fat respectively. Milk is roughly 88% water, so 100 g of milk is about 88 g of water toward the hydration figure. Oil is usually listed as its own percentage of the flour, somewhere between 1% and 5%, and is not part of hydration at all.

How do I weigh 1.5 g of yeast accurately?

Most kitchen scales are not reliable below 2 g. Weigh 10 g of yeast, dissolve it in the water, and use a tenth of that liquid for a 1 g dose — or use a scale that reads to 0.1 g. For a 48-hour cold ferment the difference between 1.5 g and 2 g is not enough to ruin a batch.

Related

Once you know the water, the pizza dough calculator turns the whole batch into dough balls. If you are not sure what each ball should weigh, the dough ball weight guide has the numbers for 10, 12 and 14 inch pizzas, and baker's percentage explains the maths behind all of it.